Mitsubishi Electric 3D DLP 742 Series Owner's Manual page 27

Sound, continued
Sound Global
842 Series. These settings affect audio from the AUDIO/SURROUND OUTPUT jacks.
Analog Audio
Out
Variable Use with headphones. Adjust headphone volume using the TV's volume con-
Subwoofer Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected.
Sound Auto SP
Sound SoundPro
Fixed Use with an analog A/V receiver. Control volume from the A/V receiver. The
volume of the audio output signal is fixed and is unaffected by the TV's volume
control.
trols. When set to Variable, the audio output signal is adjustable from the TV's
volume controls.
Rear Sends left and right rear audio to external speakers. Use when supplementing
the TV's speaker array with external rear speakers. See "External Rear Speak-
ers," page 15.
842 Series. Performs auto calibration of the Sound Projector speaker array. Use of this
menu is explained in the Basic Owner's Guide supplied with the television.
842 Series. Lets you set up the Sound Projector speaker array manually. Use of this
menu is explained in the Basic Owner's Guide supplied with the television.
2. TV Menus
For assistance call 1(800) 332-2119
27