Mitsubishi Electric FR-D700 Instruction Manual page 6

Wire and ferrule specification
Wire size (mm
0.3 / 0.5
0.75
1.25 / 1.5
0.75 (combined 2 wire)
*Ferrules and tools are distributed by Phoenix Contact.
Jumper cable
The jumper cable between S1,S2 and SC terminal has been installed in the factory as shown in Fig.2.
Before connecting safety input wire to S1,S2 and SC terminal, remove this jumper cable.
Table.4 wire and ferrule specification
2
) Ferrule with insulation collar *
1
AI TWIN 2 X 0,75-10GY
AI 0,5-10WH
AI 0,75-10GY
AI 1-10RD
AI1,5-10BK
AM AM
Fig.2. Short wire
4
Crimping tool *
CRIMPFOX ZA3