Conformation To The Emc Directive And Low Voltage Instruction; About The Generic Terms And Abbreviations - Mitsubishi Q64AD User Manual

Conformation to the EMC Directive and Low Voltage Instruction

For details on making Mitsubishi PLC conform to the EMC directive and low voltage instruction when
installing it in your product, please see Chapter 3, "EMC Directive and Low Voltage Instruction" of the User's
Manual (Hardware) of the PLC CPU to use.
The CE logo is printed on the rating plate on the main body of the PLC that conforms to the EMC directive
and low voltage instruction.
By making this product conform to the EMC directive and low voltage instruction, it is not necessary to make
those steps individually.

About the Generic Terms and Abbreviations

Unless otherwise specified, this manual uses the following general terms and abbreviations.
Abbreviation/general terms
A/D converter module
Personal computer
GX Developer
GX Configurator-AD
QCPU (Q mode)
QnPHCPU
Personal computer
Factory setting
A - 9
Description of the abbreviation/general terms
Generic term for Q64AD, Q68ADI, Q68ADV
®
IBM PC/AT or compatible computer with DOS/V.
Generic product name of the product types SWnD5C-GPPW-E, SWnD5C-GPPW-EA,
SWnD5C-GPPW-EV and SWnD5C-GPPW-EVA.
"n" in the model name is 4 or greater.
Generic term for analog-digital converter module setting and monitor tool GX
Configurator-AD (SW0D5C-QADU-E)
Generic term for Q00JCPU, Q00CPU, Q01CPU, Q02CPU, Q02HCPU, Q06HCPU,
Q12HCPU, Q25HCPU
Generic term for Q12PHCPU and Q25PHCPU.
Generic term for DOS/V personal computer
Generic term for analog input ranges 0 to 10V, 0 to 5V, 1 to 5V, -10 to 10V, 0 to 20mA
and 4 to 20mA
A - 9