Feature Menu - Hitachi 32LD8700U B Instructions For Use Manual

mended to select High if listening at high vol-
ume levels. There is a subwoofer output that
can accept an active subwoofer if you wish to
create very high levels of Bass.
3DS
This feature is used to create the impression
that sound is coming from around the room
instead of from the set speakers. Pressing
 
the / buttons will turn the feature on or off.
SubWoofer
It is possible to connect an external, active
subwoofer to the set to give a much deeper
bass effect.


By pressing /
Subwoofer can be set to On or Off.
Set Subwoofer to On when you connect an
external subwoofer to the set.

Feature menu

 
By pressing / button, select the third icon.
Feature menu appears on the screen.
Sleep Timer
Child Lock
Language
AV-2 Out
Default Zoom
Blue Background
Menu Background
Menu Timeout
Teletext Language
Sleep Timer

By pressing /

Timer. The timer can be programmed be-
tween Off and 2 hours in steps of 10 minutes
 
by pressing / button. If sleep timer is acti-
vated, at the end of the selected time, the TV
goes automatically to stand-by mode.
button, select Subwoofer.
FEATURE
Off
Off
English
AV - 1
Panoramic
On
Translucent
30 sec
West
button, select Sleep
Child Lock
You can use this feature to prevent children
turning the TV on or changing programs or
adjustments etc. without remote control.
The child lock feature can be set by
ton to either on or off. When off is selected,
there will be no difference in the operation of
your TV. When on is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
rear side of the TV will not work. If one of
these buttons is pressed, "Child Lock On" will
be displayed on the screen.
Language

By pressing

By pressing
language.
AV-2 Out
By pressing

You can set AV-2 Out to TV, AV-1, AV-3,
AV-4, AV-5, PC RGB or DTT by pressing

button.
Note: Only audio input is available for AV-3,
AV-5 and PC RGB. The other options have
both audio and video outputs.
Default Zoom
By pressing

Zoom. You can set Default Zoom to Pan-
oramic, 4:3 or 14:9 Zoom by pressing
button. If there is no WSS or aspect ratio
(picture size) information and zoom mode is
selected as Auto by pressing the
then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 25.
Blue Background
You can set the TV to automatically change
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
The Blue Background feature can be turned
on or off by pressing
- 20 -
/  button, select Language.

/ button, you can select the
/  button, select AV-2 Out.
/  button, select Default
 
/ button.
 
/ but-

/
 
/
button,