Advertisement
If the following symptoms occur, please carry out the checks and adjustments
described below. There may be no malfunction.
SMART
➾
Shows the MUX and Service information etc. If you select Antenna & Satellite or
Cable & Satellite, a signal test only for Antenna or Cable is displayed.
General
❐
Problem
Cannot view certain
programmes.
There is a delay after the
TV is switched on before
the image is fully visible.
Settings
➙
SUPPORT
• Adjust the location or orientation of the antenna.
• Save the programmes you wish to view later using
Tuning
• This is not a problem. Image noise that may occur when
the TV is first switched is being cleaned up.
➙
Signal Test
Solution
or
Programme
Edit.
Auto
Advertisement
