How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected
Adjusting sound quality
Touch
PEQ
adjustment screen.
Touch
FRONT
CENTER
the channel to be adjusted.
Touch
BAND
be adjusted.
● Each time
band will be changed in the order
shown below.
1
2
Touch
select the frequency to be
adjusted.
●
: Increase frequency
: Decrease frequency
Touch
adjust the frequency level.
● The frequency level can be adjusted
-10 dB to 10 dB (in units of one)
: Increase level
: Decrease level
The graph in the center of the screen is displayed when the frequency
characteristics are measured. For more information, refer to "Measuring/
Displaying frequency characteristics" on page 144.
142
Adjusting/Saving a PEQ
in the sound
,
REAR
,
or
to select
WOOFER
to select the band to
BAND
is touched, the
3
4
5
or
for FREQ to
or
for LEVEL to