Table of Contents
Advertisement
If you want to exit from A.P.S. function, press
t he
button. For going back, press M.
TV
When you press OK button for starting APS,
all stored programs will be erased and the
following screen will be displayed:
Auto. Programming System
Automatic tuning runs at:
State: Fine scanning ...
Whenever you press the
function stops and program table appears on
the screen.
If you wait until the end of A.P.S., Program Table
is displayed with the programmes found and
located.
Teletext Region
Select Txt. region by pressing
Using
/
buttons, select your teletext region.
There are five options to select: West Europe,
East Europe, Turk/Gre, Cyrillic and Arabic/
Hebrew.
Install menu in AV modes
The following screen appears in the install
menu:
INSTALL
Programming
Txt. Region
Back : Menu
Programming
Select Programming by pressing
button. After pressing
menu appears on the screen:
78 %
Exit : TV
button, A.P.S.
TV
/
button.
West Europe
Exit : TV
/
button, programming
- 36 -
PROGRAMMING
Colour System
VCR Mode
Store
Back : Menu
Colour System
Select Colour System by pressing
button. Press
/
system to PAL, SECAM or AUTO.
Program Table
Program Table
P01 BBC 1
P02 C 04
P03
P04
P05
P06
P07
P08
P09
P10
Delete
Name
Program Table lists the channels that are
stored in the memory. By moving the cursor in
four directions, you can reach 20 programmes
in the same page. You can scroll up or scroll
down to see all the programmes while in TV
mode by pressing the navigation buttons. By
cursor action, programme selection is done
automatically.
Name
To change the name of a programme, select
the desired programme and press the
YELLOW button.
The first letter of the selected name starts to
blink. Press
/
and
/
button to select the other letters. By
pressing the YELLOW button, you can store
the name.
Exit : TV
button to change the colour
P01
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
Move
A.P.S
Exit: TV
button to change that letter
PAL
Off
/
Advertisement
Chapters
Table of Contents
