Searcting An Input Signal; Selecting An Aspect Ratio; Adjusting The Zoom And Focus - Hitachi ED-X8250 User Manual

Searching an input signal
1.
Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
find any input signals.
Then when an input is found, the projector will stop searching and display the
image. If no signal is found, the projector will return to the state selected before
the operation.
RGB IN 1  RGB IN 2  COMPONENT VIDEO  S-VIDEO  VIDEO

Selecting an aspect ratio

1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
 For an RGB signal
NORMAL  4:3  16:9
 For a video signal/no signal
4:3  16:9  SMALL
● The NORMAL mode keeps the original aspect ratio of the signal.
● For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT
VIDEO input, only 16:9 mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.
Use the zoom knob to adjust the screen size.
2.
Use the focus ring to focus the picture.
Focus ring
Operating
Zoom knob
19