Miele CM 5100 Operating Instructions Manual page 61

FILL WATER CONTAINER AND PLACE IN THE MACHINE appears in the
display even though the water tank is full
The water tank is not seated
correctly.
PROCESS STOPPED WATER CONT. EMPTY appears in the display and the
dispensing stops
There is not enough water in the
water tank.
Frequently Asked Questions
^ Remove the water tank and then place it
back into the niche.
If the fault message still appears
^ empty the water container.
^ Check to see that the float moves freely, by
shaking the water tank.
^ Fill the water container with fresh, cold tap
water and replace it in the coffee system.
If the fault still appears, contact Miele
Technical Service.
^ Fill the water container with fresh, cold tap
water and replace it in the coffee system.
^ Press the OK button.
CONTINUE DISPENSING -YES appears in the
display.
^ Press the OK button to continue dispensing,
or select NO to cancel the preparation.
61