Ricoh PRO 1106EX Operating Instructions Manual page 21

Note
❒ Select [802.11 Ad-hoc] mode when connecting Windows XP as a wireless LAN
client using Windows XP standard driver or utilities, or when not using the
infrastructure mode.
❒ For details about how to make settings of wireless LAN from the control pan-
el on the machine, see "IEEE 802.11b".
❒ For details about how to make settings of wireless LAN from other than the
control panel on the machine, see "Using Utilities to Make Settings".
❒ For details about the setting items, see "IEEE 802.11b".
Reference
p.59 "IEEE 802.11b"
p.33 "Using Utilities to Make Settings"
Checking the Connection
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖ When using in infrastructure mode
1.
If [LAN Type] on the [Interface Settings] / [Network] screen is not set to [IEEE
802.11b], it does not light, even if the main power is on.
2.
If it is connected properly to the network, the LED is green when in infra-
structure mode. If the LED is blinking, the machine is searching for devices.
1
2
ZGDH600J
Connecting to the Interfaces
1
13