Panasonic CF-T5LWETZ1 Service Manual page 32

9.3.2.3. Putting TP Flexible Protection Tape
Sub-materials tape 30mm
Upper : The tape is matched to the edge
Right and left :
The tape is matched to Flexible cable's
right edge.It does not overflow.
9.3.2.4. Putting LCD Side Dumpers
Put the Side Dumper
Side Dumper
LCD
The rib match of thick one.
of the glass. It does not overflow.
Overflow NG to the rear side in front of overflow OK
LCD insulator
There is a possibility to destroy the prism lens
when pressurizing too much when the both sides
tape is affixed
TP Flexible cable
protection tape
Upper :
Right and left :
It is matched to Flexible cable right edge.
it does not overflow.
The tape is turned inside out.because
the tape of the sub-materials begins to
see from Flexible cable is turned as
shown,sticking side is lost.
LCD
LCD insulator
32
Near in the under putting of
tape.
Do not get on and do not go up.
Side Dumper
LCD
The edge side match of a thick part.
Substrate externals
standard
Frame externals
standard