Video - Magnavox ZC320MW8B Owner's Manual

Digital video disc recorder
Table of Contents

Advertisement

Video

Press [STOP C] if you are playing back a disc.
1
Press [MENU] and use [K / L] to
select "General Setting", then press
[OK].
2
Use [K / L] to select "Video", then
press [OK].
3
Use [K / L] to select a desired item,
then press [OK].
1
Progressive Scan
2
TV Aspect
3
Video Input
Submenu will appear.
4
Refer to 1 to 2 on this page and set
the selected item.
3
• For
refer to page 36.
5
When you finish with setting, press
[MENU] to exit.
76
76
EN
EN
SETUPS
1
Progressive Scan (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [OK].
2) Use [{ / B] to select "Yes", then press [OK].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p),
you are recommended to use the component video
cables (commercially available) to connect this unit
to the TV. (Refer to pages 14-15.) If not, use the RCA
video cable and set the progressive scan to "OFF" or
press and hold [MENU] for more than 3 seconds
during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3),
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back or watching digital TV
broadcasting with the unit and your TV screen (4:3
standard or 16:9 widescreen TV).
Use [K / L] to select a setting, then press [OK].
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
Progressive Scan
ON
OFF
"Yes",
Yes
No
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zc320mwf7Zc320mw8b/f7

Table of Contents