Installing The Remote Control Receiver; 4-1.Installing - Epson PowerLite 5350 Installation Manual

4.Installing the remote control receiver

4-1.Installing

The remote control receiver is required if you want to operate the projector at a distance of
10 m or more from it, or if the remote control cannot be pointed towards the remote control
sensor on the projector due to impediments.
Caution:
• The distance between the remote control receiver and the remote control must be kept within 8
m.
• Do not extend the remote control receiver cord with an extension cord. Extension may cause
malfunction.
• Do not place the remote control receiver in an area exposed to direct sunlight or a fluorescent
light.
(1) Turn off the projector and computer.
(2) Plug the remote control receiver cord in the "Remote" at the back of the projector.
Remote
terminal
(3) Place the remote control receiver at a place where it can be operated by the
remote control.
EMP-7350/7250/5350
Remote
terminal
61
EMP-8000