<Connecting to a workstation>
Note:
• If the projector is located at a distance from a workstation, a universal extension cable can be
used to connect to the workstation. Avoid an unnecessarily long cabling. The unnecessarily
long cabling may cause image noise.
• Never tie the EWS cable and power cable together. It may cause image noise.
• To project the computer image using the BNC terminal, make the necessary settings as referring
to the section
"Setting the BNC terminal entry mode"
If the workstation has a 13w3 port:
With the projector, an optional 3.0 m (ELPKC12) "13w3-5BNC" cable can be used to connect to a
workstation.
EMP-7350/7250/5350
13w3 - 5BNC cable
25
described below.
Computer1 terminal
EMP-8000