Table of Contents
Advertisement
How to operate the Sound Adjustment Mode
Measuring/display frequency characteristic
Frequency characteristics inside the vehicle can be measured and
displayed on the display. The measurement result can be referred
to when adjusting parametric equalizer. This result is also
necessary to automatically correct parametric equalizer setting
using E-iSERV sound effect customizations.
● Adjust time alignment (see page 161) and crossover (see page
● When measuring frequency characteristics, CSII and Loudness
163) before measuring frequency characteristics.
settings are automatically cancelled.
Connect the accessory microphone with a RCA
connector to the L-CH of the AUX jack of the deck.
The selection item will be highlighted.
Turn the [SEL] button to select the PEQ.
Align the microphone with the actual ear position and attach it
to the headrest or other appropriate fixture. (Attach the
microphone using tape or string.)
Press the [SEL] button.
The mode will be change to parametric equalizer adjustment
mode.
158
[SEL] button
Advertisement
Table of Contents
