Changing The Radio Band Location - Fujitsu ECLIPSE CD8455 Owner's Manual

How to operate the tuner

Changing the radio band location

The location for the radio bands used between the North American region
and the Asia/Australia/Latin region can be switched. The default setting is
USA (North America).
When an optional HD Radio tuner unit is connected, radio band
location is set to USA. Other radio band locations are unavailable.
(U.S.A. only)
Check that the deck is in standby mode.
Press and hold button [3], then the [FM AM] button, and
hold both for more than three seconds.
The radio band switches in the order shown below each time the
buttons are pressed.
After this, the broadcast stations will be searched for automatically
and stored in buttons [1] to [6].
[FM AM] button
Button [3]
USA ASIA
AUS
LATIN
116