Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MB QUART MAXX-LINK MLX-100
Summary of Contents for MB QUART MAXX-LINK MLX-100
- Page 2 Single and dual sub applications, independent and bridged mode applications bridged mode applications Troubleshooting and diagnostics........................8 Troubleshooting and diagnostics........................8 Product Warranty..............................9 Product Warranty..............................9 The contents of this manual may not be reproduced or copied without the written consent of MAXXSONICS USA, Inc.
- Page 3 MAXX-LINK MLX-100 BRIDGING MODULE FEATURE DESCRIPTIONS END PANEL CONNECTIONS MASTER OUT / SLAVE IN: The Master Out sends master signal to another MLX-100. The Slave In receives a Master signal and all controls are bypassed on the unit. BR-1 REMOTE CONTROL: Using an Rj45 cable, the BR-1 Bass Remote Module plugs directly into the MLX-100 and allows you to adjust the Level from -20dB to 0 dB as well as Normal and Bypass operations.
- Page 4 MAXX-LINK MLX-100 BRIDGING MODULE SLAVE MASTER 35Hz 250Hz 15Hz 35Hz TEST TONE MODE LOW PASS RED - CLIP OUTPUT SUBSONIC GREEN - 9V 65Hz FILTER LEVEL FILTER 24 dB/OCT 24 dB/OCT MAXX-LINK MLX-100 0.2V +10 dB 30Hz 100Hz INPUT PHASE BOOST BANDWIDTH FREQUENCY...
- Page 5 MAXX-LINK MLX-100 BRIDGING MODULE APPLICATIONS Linking 2 MLX-100s using Master/Slave operations This application illustrates the method of linking 2 MLX-100’s using the Master/Slave features. 1. Connect the full range RCA outputs from the headunit to the MLX-100 #1’s inputs. 2. Connect a single RCA from MLX-100 #1’s MASTER OUT to MLX-100 #2’s SLAVE IN. 3.
- Page 6 MAXX-LINK MLX-100 BRIDGING MODULE APPLICATIONS Mono bridging 2 standard mono amplifiers with no Master/Slave feature to a single subwoofer This application illustrates the method of linking 2 Mono amplifiers to a single subwoofer. 1. Connect the full range RCA outputs from the headunit to the MLX-100 inputs. 2.
- Page 7 MAXX-LINK MLX-100 BRIDGING MODULE APPLICATIONS Mono bridging 2 standard mono amplifiers with no Master/Slave feature to a single subwoofer Mono Block Amplifiers INPUT -6dB BYPASS Speaker Terminals RED - CLIP -20dB GREEN - 9V NORMAL LEVEL SLAVE MASTER 35Hz 250Hz 15Hz 35Hz TEST TONE...
- Page 8 MAXX-LINK MLX-100BRIDGING MODULE APPLICATIONS Mono bridging 4 standard amplifiers with no Master/Slave feature to 2 subwoofers This application illustrates the method of linking 4 Mono amplifiers to 2 subwoofers. 1. Connect the full range RCA outputs from the headunit to the MLX-100 inputs. 2.
- Page 9 MAXX-LINK MLX-100 BRIDGING MODULE APPLICATIONS Mono Block Amplifiers Mono bridging 4 standard amplifiers with no Master/Slave feature to 2 subwoofers INPUT Speaker Terminals -6dB BYPASS RED - CLIP -20dB GREEN - 9V INPUT NORMAL LEVEL 12ga. Wire link SLAVE MASTER 35Hz 250Hz 15Hz...
- Page 10 TROUBLESHOOTING A SYSTEM The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault. The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the Diagnostic system built into the MLX-100 Maxx-Link Bridging Module: Description of the Diagnostic system built into the MLX-100 Maxx-Link Bridging Module: 1.
- Page 11 As the manufacturer of Maxxsonics, Crunch, MB Quart and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase.