Removing Feeder Assembly 500 - Epson EPL-N1600 Option Service Manual

EPSON EPL-N1600/500 Sheets Feeder

4.1.3 Removing Feeder Assembly 500

1. Disconnect the AC power cord to the rear of the printer.
2. Disconnect all interface Cables to the rear of the printer.
3. Remove the Paper Cassette from the Feeder Assembly 500.
4. Remove the 250 Sheet Paper Cassette (2). Remove the Duplex
Chute Cover Assembly (2), if optional Duplex Unit is installed.
5. Press the Joint Feeder clips together and remove the two rear Joint
Feeder clips securing the Feeder Assembly 500 to the printer or the
Duplex Unit (1).
6. Press the Joint Feeder clips together and remove the two front Joint
Feeder clips securing the Feeder Assembly 500 to the printer or the
Duplex Unit (3).
7. Lift the base engine off of the Feeder Assembly 500. If the optional
Duplex Unit is installed, first lift the base engine off of the Duplex
Unit, then lift the Duplex Unit off of the Feeder Assembly 500.
Rev. 0
Chapter 4 DISASSEMBLY AND ASSEMBLY
Figure 4-1. Removing Feeder Assembly 500
19