Shuttle; Aligning The Shuttle Shaft - Duerkopp Adler 550-16-23 Service Instructions Manual

4.

Shuttle

4.1 Aligning the shuttle shaft

10
3
Caution: danger of injury
Turn off the main switch.
The shuttle shaft may only be adjusted with the machine switched off.
Regulation and inspection
The shuttle shaft 1 is factory-aligned.
When it is correctly aligned the shuttle 3 is equidistant from the
shuttle-drive housing 2 at every point.
Adjustment
–
Undo screw 5.
–
Remove support 4.
2 1
4
5