Download Print this page

Setting The Working Level - Duerkopp Adler 550-16-23 Installation Instructions Manual

Hide thumbs Also See for 550-16-23:

Advertisement

3

Setting the Working Level

4
1
The working level can be set between 750 and 900 mm
(Measured up to the table top).
Loosen the screws 1 on the sleepers of the stand.
Set the table top so that it is at the desired level and in horizontal
position.
In order to avoid a jamming, push the table top in and out equally
on both sides.
Tighten both screws 1.
1

Advertisement

loading