server, you press the latch release buttons and pull the print server out
of the LIO slot.) The RJ-45 plug on the network cable plugs into the
network connector. When the print server establishes a valid network
connection, either the "10" or "100" link light comes on, to indicate a
connection speed of 10 mbps or 100 mbps. The status light shows the
health of the print server (see
button to print a configuration page on the attached printer (see
Interpreting the configuration
Package contents
The HP Jetdirect 200m and 250 m products include:
print server module
HP Jetdirect CD (includes installation software, manuals, and
troubleshooting)
setup poster
Interpreting the
lights). You push the test
page).