A, B, C, Assembly: ASSEMBLY GUIDE CAUTION: For your safety, before operating, Read Product Guide & Outdoor Cooking Guide provided with this grill. *SAFETY First….. Grill components may have sharp edges. Be careful when handling grill parts during assembly. We suggest that you wear a sturdy pair of leather gloves while handling the grill parts. BEFORE You begin assembly of your grill….
GRILL CART Assembly ASSEMBLY GUIDE Fasteners Part – Cart Base – Front Leg Set – Rear Leg Set – Wheels Wheel Retaining 1/4x20-1/2" 3/8-16 Nut – Hubcap screw Clip (qty 2) (qty 4) (qty 2) Step 1 – Attach Front Leg Set (A2) to the Cart Base (A1) using 2 1/4-20 screws.
Page 5
GRILL CART Assembly ASSEMBLY GUIDE Fasteners Part – Cart Bracket Wire Shelf – – Leg End Cap 1/4x20-2" #10x3/8" 1/4-20 Nut 1/4-20 Nut screw screw (qty 2) (qty 2) (qty 2) Step 3 - Carefully turn the Cart Assembly over and allow it to rest on the tops of the leg assemblies.
GRILL FINAL Assembly ASSEMBLY GUIDE NOTE: The Cooking Grate may Part Qty. have sharp edges. Be very careful Cooking Grate C1 – when handling the Cooking Grate. C2 – Warming Rack You should wear gloves when C3 – Grease tray handling the Cooking Grate.
Page 8
GRILL FINAL Assembly ASSEMBLY GUIDE Part Qty. Fasteners C4 – Controller Fiber Washer 10-24x3/8" C5 – Lid Handle screw (qty 2) (qty 2) NOTE: Be sure to press the controller into the receptacle as far as it will go. Route the controller cord BEHIND the towel bar as shown.