Table of Contents
Advertisement
Chapter 6 - GLP
GLP (Good Laboratory Practice) is a set of functions that allows the storage or
retrieval of data regarding the probe calibration.
This feature allows also to associate a reading to "certified data" (standard solu-
tions, reference meters, etc.) put in the meter
through the calibration procedure.
To visualize GLP data, while in measurement
mode, press the MENU soft key and scroll with
the arrow key to highlight the "GLP data" entry.
The complete list of available parameters ap-
pears; highlight the desired entry with the arrow
keys and press OK to visualize the relative infor-
mation.
NOTE: When there are no available calibration
data for the selected parameter, the
message "No GLP data available for this
measurement" appears. Press OK to go
back to the previous screen.
6.1 PROBE INFORMATION
• To visualize the probe information, highlight the
entry and press OK.
• The probe information appear: model, firmware
version, ID and serial number.
• Press OK to go back to the previous screen or
MODIFY ID to change the identification code.
• By pressing MODIFY ID a textbox appears: use
the keyboard to change the code and then press
OK.
• The messages "Storing data on probe, please wait..." and "Data successfully
stored on probe" appear.
• Press OK to go back to the Probe information screen.
46
Hide quick links:
Advertisement
Table of Contents
