Advertisement
4
Insert front brace under control panel and between cart side panels.
Secure using two 1/4-20x1½" screws, 7mm lock washers, and 7mm flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
1/4-20x1½"
screw
7mm lock
washer
Front brace
7mm flat
washer
5
Attach left side fascia to left side shelf using two #10x3/8" screws, 5mm lock washers and 5mm flat washers.
Only left side shelf shown for assembly, install right side shelf with fascia in the same way.
5mm flat washer
5mm lock washer
#10x3/8" screw
Left side shelf
Left side fascia
15
Advertisement
