Attach The Rail To The Header Bracket - Power Drive PD758DS 3/4 HP Owner's Manual

Header Wall
Header Bracket
Inner Pulley
Garage Door
HARDWARE SHOWN ACTUAL SIZE
Clevis Pin 5/16"x1-1/2"
INSTALLATION STEP 3

Attach the Rail to the Header Bracket

• Position the opener on the garage fl oor below the
header bracket. Use packing material as a protective
base. NOTE: If the door spring is in the way you'll need
help. Have someone hold the opener securely on a
temporary support to allow the rail to clear the spring.
• Position the rail bracket against the header bracket.
• Align the bracket holes and join with a clevis pin
5/16"x1-1/2" as shown.
• Insert a ring fastener to secure.
Header
Bracket
Mounting
Hole
Ring Fastener
14
Opener Carton or
Temporary Support