Installation And Connection; The Imager Head And Cable Installation - CEN-TECH 67980 Set Up And Operating Instructions Manual

Installation and Connection

3. Installation and Connection
3 .1 T he Imager Head and Cable Installation
1 4 B 3 1 2 B
T o use the tool, the imager head and cable must be connected to the
1 4 3 B
display unit. To connect the cable to the display unit, make sure the
key and slot (Fig. 4) are properly aligned. Once they are aligned, slide
the connecting sleeve up to the threads on the cable, and finger-tighten
to hold the connection firmly in place.
Fig. 4
8
Accessories Installation