Appendix A. Examples Of Configuring Intel Amt In Manual And Automatic Setup And Configuration Modes; Configuring Intel Amt In Manual Setup And Configuration Mode; Configuring Intel Amt In Automatic Setup And Configuration Mode; Ztc Provisioning - Lenovo ThinkCentre M90p Configuration Manual

Appendix A. Examples of configuring Intel AMT in manual and
automatic setup and configuration modes
This appendix provides examples of configuring Intel AMT in manual and
automatic setup and configuration modes.

Configuring Intel AMT in manual setup and configuration mode

The following are quick steps for configuring Intel AMT in manual setup and
configuration mode:
1. Repeatedly press and release Ctrl+P when turning on the computer. When you
2. Select Intel(R) ME General Settings → Network Setup → Intel(R) ME Network
3. In the INTEL(R) ME NETWORK NAME SETTINGS window, configure the host
4. In the INTEL(R) ME PLATFORM CONFIGURATION window, select Power
5. Select Intel(R) ME ON in Host Sleep States and press Enter.
6. Select Desktop: ON in S0, ME Wake in S3, S4-5 and press Enter.
7. In the INTEL(R) ME PLATFORM CONFIGURATION window, select Activate
8. Select Exit in the Intel MEBx MAIN MENU window to exit the MEBx.

Configuring Intel AMT in automatic setup and configuration mode

There are the following two configuration methods in automatic setup and
configuration mode:
v "ZTC provisioning"
v "USB provisioning" on page 26

ZTC provisioning

This section provides instructions on how to use the ZTC provisioning method.
1. Repeatedly press and release Ctrl+P when turning on the computer. When you
2. Select Intel(R) ME General Settings → Network Setup → Intel(R) ME Network
3. In the INTEL(R) ME NETWORK NAME SETTINGS window, configure the
4. In the INTEL(R) ME PLATFORM CONFIGURATION window, select Remote
5. In the INTEL(R) ME PLATFORM CONFIGURATION window, select Power
© Copyright Lenovo 2010
see the Intel Management Engine BIOS Extension window, release the Ctrl and
P keys. Press 1 to enter the Intel MEBx MAIN MENU window. Type the default
password admin and then change the Intel ME password.
Name Settings.
name and domain name for your Intel AMT computer.
Control.
Network Access and press Enter. Press Y when prompted.
see the Intel Management Engine BIOS Extension window, release the Ctrl and
P keys. Press 1 to enter the Intel MEBx MAIN MENU window. Type the default
password admin and then change the Intel ME password.
Name Settings.
domain name for your Intel AMT computer.
Setup And Configuration → TLS PKI → Mange Hashes. Press Insert and then
set up your own certificate hashes.
Control → Intel(R) ME ON in Host Sleep States.
25