Casio Privia PX-750 User Manual page 33

4.
Insert angle brackets
the anti-tipping bracket and the side panel.
5.
From the outside of side panels
temporarily tighten the screws you loosened
in step 3, above.
6.
E
Mount pedal unit
which you installed in step 5, above.
E
7.
F
Use two screws to secure both ends of the
E
pedal unit to the angle brackets.
F
H
into the gap between
H
A B
and ,
H
onto angle brackets ,
8.
Cover the heads of the
I
caps .
I
9.
After adjusting the position (height) of pedal
E
unit , fully tighten the screws that you
temporarily tightened in step 5, above.
10.
Mount the piano onto the stand. Position the
piano so the dowels on the top edges of side
A B
panels and enter the dowel holes on the
bottom of the piano.
• Note that there is nothing anchoring the piano to the
stand at this time. Take care to ensure that the piano
does not fall off the stand.
Assembling the Stand
F
screws with screw
E-31