Snapshot Tutorial; Using The Control Panel - Casio Exilim EX-FC200S User Manual

Snapshot Tutorial

Using the Control Panel

The control panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the setting you want to change.
This will select one of the control panel icons and display its settings.*
Image size/Quality*
1
ISO sensitivity (page 41)
2
White balance (page 42)
3
EV shift (page 43)
4
Not displayed in this mode
5
Not displayed in this mode
6
Not displayed in this mode
7
Flash (page 44)
8
Date/Time (page 45)
9
*1
Items displayed in the control panel depend on the recording mode.
*2
Image quality cannot be changed using the control panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
• You can close the Control Panel by pressing [AUTO].
2 (pages 38, 98)
37
[8] [2] [4] [6]
[SET]
1
Control panel
1
2
3
4
5
6
7
8
9
Snapshot Tutorial