Registering The Required Sender Information - Canon IMAGERUNNER 2010F Facsimile Manual

Hide thumbs Also See for IMAGERUNNER 2010F:
Table of Contents

Advertisement

Registering the Required Sender Information

According to recent amendments to the FCC (Federal Communications
1
Commission) rules governing the use of facsimile equipment in the United States,
the following sender information must be printed on every facsimile transmission.
Your fax number
Your personal name or company's name
Date and time of transmission
The sender information you register is printed as shown below.
After your fax is received, the other party knows immediately where it came from
because your sender information is printed at the top of every page you send.
If the TX TERMINAL ID is set to 'OUTSIDE IMAGE':
Date and Time Fax Number
If the TX TERMINAL ID is set to 'INSIDE IMAGE':
Date and Time Fax Number
NOTE
You can set not to print the TX Terminal ID even if it is registered. (See "Registering the
Sender Information (TX Terminal ID)," on p. 1-16.)
If you set the TX TERMINAL ID to '01 ON', and there are unregistered items, only the
registered items and the page number are printed on the documents.
1-12

Registering the Required Sender Information

2001 11/12 10:07
FAX 111 2222
2001 11/12 10:07
FAX 111 2222
Unit's Name or
Sender's Name
JOHN
Unit's Name or
Sender's Name
JOHN
Page Number/ Total
Number of Pages
001/001
Page Number/ Total
Number of Pages
001/001

Advertisement

Table of Contents
loading

Table of Contents