Tv Settings; Appendix; Cleaning And Care - Element ELCHS371 User Manual

Basic operation
? Input Block
- You can block the input source with this function. For example, if you want to block AV
input, just highlight [
?
Change Password
change it, first enter the new password then enter the same password again.
?
Clean All - This function will let you clean all the channels stored on this TV.
Note : If you choose this function, all the programs you preset will be lost.

TV settings

1. Press MENU to open the OSD option
p q
2. Press or to highlight TV, then press
TV
Tuner Mode
Channel Scan
Channel Skip
MTS
Audio Language
TV
: Select ENTER: Enter
p q
3. Press or to highlight an option, then press
adjust:
?
Tuner Mode - Select the TV signal source. You can select
? Channel Scan
When you press
? Channel Skip -
channel you deleted. You can still tune to the channel using the number buttons on the remote control.
? MTS - Selects the sound mode. You can select Mono, Stereo, or SAP (second audio program).
?
Audio Language

Appendix

Cleaning and care

WARNING: Do not try to remove the cabinet from the back. Refer servicing to qualified service technicians.
To clean the TV screen:
1. Unplug the TV to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause
damage to the TV.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution : Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
AV ] and press [ENTER
- The first time you use this function, use the default password. If you want to
u
Antenna
Stereo
English
ENTER Enter Select EXIT Exit
EXIT: Exit
- Scans for channels that have signals and stores the channels information in memory.
t u
or , your TV skips any channels that do not have a signal.
Deletes a channel stored in memory. When you press
-Selects the audio language for a program.
]. The AV input will not be seen in the screen.
to enter the TV menu.
t u
or to adjust the option. You can
Antenna
22
or Cable .
CH+ or CH- , your TV skips the