Connecting Your Tv; Connecting To An Antenna; Connecting To A/V Equipments; Service Jack - Element ELCHS192 User Manual

Preparation for using your new TV

Connecting your TV

Caution: Do not plug in the TV until you have finished connecting all of your equipments.

Connecting to an antenna

To enjoy the televison programs transmitted by your local TV stations, you need an indoor or outdoor
antenna (not supplied). An outdoor antenna is necessary for perfect picture quality. If you are a
subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments
as shown below.

Connecting to A/V equipments

To enjoy the multimedia features, you can connect your TV to A/V equipment such as DVD, Satellite
receiver, Camcorder, Audio amplifier etc., and select signal source using your remote control. Connect
audio cables to "R -AUDIO - L" on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
NOTE: 1. Headphones are not included.
2. No sound will be heard from the main unit speakers when a headphone mini-plug is
connected into the headphone jack.

Service jack

Connector for service only (do not connect any equipment here).
Connecting component devices (DVD/DVR)
Connect Component video and audio cables to Component inputs ("PR/CR", "PB/CB", "Y") on the rear of your set
and the other ends to corresponding component video out connectors on the DVR or DVD.
The Y, PB/CB and PR/CR" connectors on your component devices (DVR or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, CB and CR (Colors for inputs and cables must correspond to both devices).
:
NOTE Some devices such as a DVD players require 'Component/YPBPR' signal to be set via output in the devices
settings. Please consult your device user manual for instructions
1.
2.
.
6
3.