Channel Skip; Setup Menu Options - Element ELCFT191 Instruction Manual

Operating Your Television

Channel Skip

Channel Skip
Select "
/
Press to select the desired channel, then press OK.
OK

Setup Menu Options

MENU
Press the on the front panel or
OK
menu, press or
OSD Language
To select language of the OSD menu
OSD Transparency
/
Press to select the transparency mode Low, High or Middle.
Time Setup
Time Setup
Select: "
Caption
(See next page)
Reset Default
Select "Reset Default", Press
default settings.
OK
"; press to enter the submenu.
MENU
to enter (see picture below).
OK
", Press to enter the submenu.
Time zone
To select time zone
Time
To set power on and power off times. Press OK to enter to set
the time.
Sleep timer
To select the sleep timer
Time Display mode
To select the Time Display Mode in 12 or 24 hour mode
OK
, and it will display "Are you sure", select "
on the remote control and then use
/
1. Use to select the option you want to adjust
in the setup menu.
OK /
2. Press or to adjust (according to the hint below).
3. When you are done with your adjustments, press
to exit.
16
/
to select the Setup
MENU
OK
" to select the factory