Remote Control Instructions - Element 19LE30Q User Manual

Using the remote control – Remote control instructions
< Inserting the batteries into the remote control >
1. Push the back of the remote control.
2. pull forward slightly.
3. Insert two AAA 1.5V batteries.
4. Ensure the correct polarity (+/-).
5. Close the lid.
CAUTION: Use only Alkaline Batteries.
If the remote control is not working, see the checkpoints below.
Are the polarities of the batteries (+, -) correct?
Are the batteries worn out?
Is there an AC power failure?
Is the power cable plugged in?
Is any special fluorescent or neon sign board turned on?
< Remote Control Reception Angle>
Use the Remote control within a range of 7~10m and at an angle of 30° to either side of the receiver.
CAUTION
Used batteries should be recycled.
Kept out of children's reach.
Do NOT use new and old batteries together.
Change both batteries at the same time.
When not using the remote control over a long time, remove the batteries from the unit.
Use only aikaline battery.

REMOTE CONTROL INSTRUCTIONS

12