Sd/Usb Operations - JVC KW-NT800HDT Instruction Manual

SD/USB operations

This unit can play the MP3/WMA/AAC/FLAC/MPEG4/MPEG4-AVC H.264/WMV files stored in SD card/USB mass
storage class device.
• All tracks in the SD card/USB device will be played repeatedly until you change the source.
• Make sure all important data has been backed up.
Playing back SD card
1
Open the monitor panel.
2
Insert an SD card.
Push in the SD card until you hear a clicking sound.
3
Close the monitor panel.
4
Select "SD" as the source.
To eject the "SD" card
Open the monitor panel (step 1 above), then push in the
SD card lightly.
Playing back USB device
You can connect a USB mass storage class device such as
a USB memory, Digital Audio Player, etc. to the unit.
• You cannot connect a computer to the USB (
terminal of the unit.
• When connecting a USB device, refer also to its
instructions.
1
Connect the "USB" device.
• Up to 4 USB devices can be connected to the USB
cable of this unit via a USB hub.
• When multiple USB devices are connected, you
can select the USB device to play by pressing
the [ ] on the USB playback screen.
(☞ page 63)
2
Select "USB" as the source.
61
)
USB cable
USB
USB
HUB
USB
USB