Asko D3532 Quick Start Manual

Quick Start Guide

We know you're excited about owning an ASKO dishwasher and you're anxious to get started, so here's a brief summary of the operation
procedures. The page references in this Guide refer to the Use and Care Guide. To get the most out of your dishwasher's features, we
recommend that you read this guide and the Use and Care Guide before using the dishwasher.
THE CONTROL P THE CONTR THE CONTR OL P OL P OL PANEL
THE CONTR THE CONTR OL P
Your ASKO dishwasher has our state-of-the-art electronic control panel, as illustrated below.
Power
button
DISPLAY Y Y Y Y WINDO DISPLA DISPLA WINDO WINDOW W W W W WINDO
DISPLA DISPLA WINDO
The display window shows the programs, options, remaining program time and fault codes. It also allows you to access the program menus
and customize the wash programs. If you select Delayed Start, the window will display the number of hours selected. When you press Start/
, the countdown time displays.
Stop
Remaining program time – The remaining program time is calculated by the time it took the program to run last time. (Note: The first time
you run a program, the display will display 1:00.) As the program progresses, the time remaining displays the hour and minutes (e.g., 1:02,
which means one hour and two minutes.)
PROGRAMS PROGRAMS
PROGRAMS PROGRAMS PROGRAMS
To select a program, simply press the program button until the program you desire displays then press Start/
described below. You can also change certain program features. See "Options" below.
Auto Wash
The dishwasher has sensors that detect the level of soil on the
dishes and adjust the water consumption and temperature
accordingly. You cannot adjust the temperature or drying time with
this program.
Heavy Wash (Cold, 85° – 170°/Sani F)
For the heaviest soiled loads, such as casseroles
or sauce pans.
Normal Wash (Cold, 85° – 170° F)
For normally soiled loads, such as plates, glasses,
bowls, and lightly soiled pans.
Mixed Wash
Designed to wash heavily soiled dishes in the lower
basket and lightly soiled dishes in the upper basket.
Upper Basket
Washes only the upper basket
OPTIONS OPTIONS
OPTIONS OPTIONS OPTIONS
Once you have selected a program, you can change some of the program features by using the options (described below). To select an
option, simply press the Menu button until the option you desire displays, then press the Set button until the desired setting displays. Press
Menu to confirm your selection. You can continue to make programming changes or press Start/
Delayed Start
This option allows you to delay starting the dishwasher from 1/2 hour
to 24 hours. Press the Menu button until Delayed Start displays, then
press Set until the number of hours you wish to delay starting the
dishwasher displays along with a flashing clock symbol. Press Menu
then press Start/ .
Stop
To cancel Delay after you press Start/
button for three seconds. If you change your mind before you press
Start/ , continue to press this button until "0" displays.
Stop
All Baskets
This option lets you set which spray arms will function. You have
three choices:
ANEL ANEL ANEL
ANEL
"The Normal Wash
program is used
for energy testing
and should be
used for normal or
lightly soiled
loads. When
washing dishes
that are more
heavily soiled, use
a longer program
with higher
temperatures such
as Heavy Wash or
Auto wash."
, hold down the Start/
Stop Stop
SELF CLEANING SYSTEM
Program Display
button window
Lower Basket
Washes only the lower basket
Delicate Wash (Cold, 140° F)
For delicate items, such as fine china and crystal, that are washed
immediately after use. When using this program, you should set the
temperature to low and dry the dishes without heat.
Quick Wash (Cold, 85° – 140° F)
For lightly soiled loads that are washed immediately after use. This
program can also be used for delicate items, but you should set the
temperature to low and dry the dishes without heat.
Rinse and Dry (120° F)
Rinses the dishes with hot water then activates the fan and heating
element to dry them.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
Stop
All Baskets – Washes the upper basket, Safe and Handy upper
cutlery basket and the bottom baskets.
Upper Basket – Washes only the upper basket and the Safe and
Handy upper cutlery basket.
Lower Basket – Washes only the lower basket
Temperature
The temperature can be changed in all programs, except Auto wash,
Rinse and Hold, and Rinse and Dry. Your choices are: cold, 85°,
105°, 120°, 130°, 140°, 160°, and 170° F. (Note: The Delicate and
Quick wash programs cannot be set over 140° F.) To select a
temperature, press the Menu button until Temperature displays, then
press the Set button until the desired setting displays. Press Menu to
confirm your selection.
When you select 170° F, the word "Sani" displays.
Options continued on next page...
Model D3532
Programming Start/Stop
buttons
. The programs are
Stop
to start the program.
button