Connecting Audio Devices (Such As Cd Players); Connecting To The Jacks On The Front Panel - Yamaha RX-V673 Owner's Manual

1 2 3 4
Playback device connections

Connecting audio devices (such as CD players)

Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
Audio output jacks on audio device
Digital optical
Digital coaxial
Analog stereo
Turntable (PHONO)
* RX-V773 only (except for U.S.A. and Canada models)
PHONO jacks*
The unit
PHONO
L
(rear)
R
Ground lead
GND
DC OUT NETWORK HDMI 1 HD
5V 0.5A (NET) HDMI OUT (BD/DVD)
1 2
ARC
ANTENNA
(RADIO)
COMPONENT COMPONENT
VIDEO VIDEO
AM FM
P R
P
R
OPTICAL
P B
P
B
VIDEO
Y
Y
MONITOR
COAXIAL
L
OPTICAL COAXIAL COAXIAL OPTICAL
AV
(TV)
OUT
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AUDIO 1 AUDIO 2
R
AV 1–6 jacks
AUDIO 1–2 jacks
If you select the input source by pressing AV 1–6, AUDIO 1–2 or PHONO*, the audio
played back on the audio device will be output from the unit.
When connecting a turntable
(RX-V773 only [except for U.S.A. and Canada models])
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
5 6 7 8 9 10
Audio output jacks on the unit
AV 1 (OPTICAL)
AV 4 (OPTICAL)
AV 2–3 (COAXIAL)
AV 5–6 (AUDIO)
AUDIO 1–2
PHONO*
Audio output (PHONO)
PHONO
L
L
R
R
GND
Turntable
O O
OPTICAL
C C
COAXIAL
Audio device
L
L L
R
R R
Audio output
(either digital optical,
digital coaxial, or analog stereo)

Connecting to the jacks on the front panel

Use the VIDEO AUX jack to temporarily connect devices such as game consoles and
camcorders to the unit.
Use the USB jack to connect an iPod or a USB storage device. For details, see
"Connecting an iPod" (p.58) or "Connecting a USB storage device" (p.62).
Before making a connection, stop playback on the device and turn down the volume on
the unit.
BD
TV
DVD NET
YPAO MIC
PHONES TONE CONTROL PROGRAM
SILENT CINEMA
The unit (front)
Game console
Camcorder
If you select "V-AUX" as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (HDMI IN) jack, you need to connect your TV to the HDMI OUT
jack of the unit (p.23 to 26).
• You need to prepare an HDMI cable that match the output jacks on your device.
• When "USB" is selected as the input source, video signals input to the VIDEO jack are output from the
HDMI OUT and MONITOR OUT (VIDEO) jacks.
PREPARATIONS ➤ Connecting playback devices
RADIO
VIDEO AUX USB
STRAIGHT
HDMI IN VIDEO iPod/iPhone/iPad
5V 2.1A
HDMI
31
En