Load Carriers (Accessory) - Volvo S60 Owner's Manual

2007 Volvo S60
A. Ball holder
B. Locking bolt
C. Safety wire attachment
D. Hitch assembly
E. Cotter pin
Installing the ball holder
- If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch
assembly.
- Slide the ball holder into the hitch assembly.
- Align the hole in the ball holder with the one in the hitch assembly.
- Slide the locking bolt through the hitch assembly/ball holder.
- Insert the cotter pin in the hole at the end of the locking bolt.
Removing the ball holder
- Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch
assembly.
- Pull the ball holder out of the hitch assembly.
A cover for the hitch assembly can be purchased from your Volvo retailer.
pg. 134 Starting and driving

Load carriers (accessory)

file:///K|/ownersdocs/2007/2007_S60/07s60_06.htm (35 of 41)12/30/2006 5:46:02 PM