Adjusting The Computer Image; Setting The Component Image - Dynex DX-40L150A11 User Manual

16
DX-40L150A11
• Cinema (stretches the picture at the edges, but
maintains a good aspect ratio at the center of the
screen).
Note: The above aspect ratios are all available only when Overscan is
turned ON when watching a digital program.
• Overscan—Turn this On to adjust the picture's
reproduction rate.
• Color Temperature—Selects the color temperature. You
can select Warm (to enhance the reds), Cool (to enhance
the blues), or Normal.
• Noise Reduction—Selects the noise reduction mode to
reduce picture noise (snow). You can select Low, Middle,
High, or Off.
• Backlight—Controls the overall brilliance of the screen.
• Advanced Contrast—Opens the Advanced Contrast
submenu. Turn this On to optimize the picture display for a
more vivid image. You can also set the Dynamic Contrast
Ratio to On to automatically adjust the contrast between the
light and dark areas of the picture.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Adjusting the computer image

Note: These settings are only available when the input source is VGA and
your TV is receiving a computer signal.
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
"Selecting the video input source" on page 13.
2 Press MENU. The on-screen menu opens.
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
MOVE SELECT
ENTER
3 Press or to highlight SETTINGS, then press . The
SETTINGS menu opens.
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
Component Settings
MOVE SELECT
ENTER
PICTURE AUDIO SETTINGS CHANNELS
Vivid
50
60
70
0
+10
PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO SETTINGS CHANNELS
PREVIOUS EXIT
M E N U X E T I
4 Press or to highlight Computer Settings, then press
ENTER. The Computer settings menu opens.
Auto Adjust
H. Position
V. Position
Clock
Phase
Reset Computer Settings
MOVE SELECT
ENTER
5 Press or to highlight an option, then press or to adjust
the option. You can adjust:
• Auto Adjust—Automatically adjusts the image settings
such as position and phase.
• H-Position—Moves the image right or left.
• V-Position—Moves the image up or down.
• Clock—Adjusts the sample frequency.
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets the computer settings
to factory default.
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Setting the component image

Note: These settings are only available when the input source is
Component and your TV is receiving a signal.
To set the component image:
1 Make sure that your TV is in Component mode. For more
information, see "Selecting the video input source" on page 13.
2 Press MENU. The on-screen menu opens.
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
MOVE SELECT
ENTER
3 Press or to highlight SETTINGS, then press . The
SETTINGS menu opens.
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
Component Settings
MOVE ENTER SELECT
Adjusting the picture
PICTURE AUDIO SETTINGS CHANNELS
50
50
50
50
PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO SETTINGS CHANNELS
Vivid
50
60
70
0
+10
PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO SETTINGS CHANNELS
M E N U PREVIOUS X E T I EXIT