Channel/Category Search Function; Quick Search Function; Changing The Display; Setting The Tuning Method - Alpine CDA-9807 Owner's Manual

Channel/Category Search Function

You can search for programs by Channel No. or Category.
1
Press the SEARCH
select Channel Search mode or Category Search
mode.
Channel Search mode:
2
Select the desired Channel No.∗ by turning the
Rotary encoder within 10 seconds.
∗ The Channel No. is selected from within the
selected Category.
3
Press the Rotary encoder to display the selected
Channel No.
NOTES
• Search mode is canceled by pressing and holding the
SEARCH button for at least 2 seconds in Channel Search
mode.
• While in Channel Search mode, press the SEARCH
to change to the Category display. Press the 8 or 9 button to
select the another Category.
Category Search mode:
2
Select the desired Category by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to display the selected
Category.
NOTES
• Search mode is canceled by pressing and holding the
SEARCH button for at least 2 seconds in Category Search
mode.
• When displaying Category, press the SEARCH
change to Channel Search mode.

Quick Search Function

You can search for all Channels.
1
Press and hold the SEARCH
seconds in XM mode to activate Quick Search mode.
2
Select the desired Channel by turning the Rotary
encoder within 10 seconds. The selected Channel is
received.

Changing the Display

Text information, such as the channel name, artist
name/feature, and song/program title, is available with
each XM channel. The unit can display this text
information as explained below.
1
In XM mode, press the DISP/TITLE
Each time you press this button, the display changes
as shown below.
∗1
Channel Number Channel Name
→ →
display display
Auxiliary
Clock
←
Data Field
display
display
1
* The Channel Name display automatically changes after 5
seconds.
2
* When ADF is turned OFF, this information is not displayed
(see "Setting the Auxiliary Data Field Display" section on
page 23).
button in the XM mode to
button
button to
button for at least 2
button.
Song Title
→
display
∗2
Artist Name
← ←
display
NOTES
• When the "Scroll Setting" (refer to page 11) is set to "SCR
AUTO", the display scrolls continuously.
When the Scroll Setting is set to "SCR MANU", the display
scrolls only once after any function is performed (PRESET,
BAND, SEARCH, etc.).
Press and hold the DISP/TITLE
seconds to scroll the display manually.
• "Channel Number" and "Clock" displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.

Setting the tuning method

You can set the tuning method. You can select the
received stations in Channel No. order or in Channel
Name order (alphabetic order).
1
Press and hold the F/SETUP button for at least 3
seconds.
2
Press the g or f button to choose between "CH
NO" or "ALPHABET."
3
Press the BAND/TEL. button to set the tuning method.
CH NO. : Set in order of channel no.
When the setting is completed, switch the
channel UP/DOWN by pressing the f or
g button.
ALPHABET :Set in alphabetic order.
When the setting is completed, switch the
channel UP/DOWN by pressing the f
or g button.
4
Press the F/SETUP button to return to normal mode.
Setting the Auxiliary Data Field
Display
The XM Auxiliary Data Field display can be switched ON
or OFF.
1
Press and hold the F/SETUP button for at least 3
seconds.
2
Select "ADF" (Auxiliary Data Field) by pressing the
g or f button.
3
Select ON/OFF by pressing the BAND/TEL. button.
When setting to ON, Auxiliary Data Field is displayed
by pressing the DISP/TITLE
"Changing the Display" section on page 23.)
4
Press the F/SETUP button to return to normal mode.
button for more than 3
button. (Refer to the
23
-EN