Dodge Avenger Owner's Manual page 192

192 UNDERSTANDING YOUR INSTRUMENT PANEL
1. Turn the ignition switch to the "ON" position. Leave
the selector lever in "P" (Park).
2. Press and release the MENU button until "Personal
Settings" displays in the EVIC.
3. Press and release the STEP button until "Compass
Variance" and the current Variance Value displays in the
EVIC.
4. Press and release the RESET button to increment the
Variance Value by one, (one button press per update),
until the proper variance zone is selected according to the
map.
NOTE: The Variance Values will wrap around from 15
back to 1. The Default Variance is Zone 8.
5. Press and release the STEP button to exit. Press the
STEP button if you wish to calibrate the compass manu-
ally (Refer to "Manual Compass Calibration").