Dodge Avenger Owner's Manual page 105

Working with Automated Systems
This method is used in instances where one generally has
to press numbers on the cellular phone keypad while
navigating through an automated telephone system.
You can use your UConnect system to access a voice
mail system or an automated service, such as a paging
service or automated customer service line. Some ser-
vices require immediate response selection. In some
instances that may be too quick for use of the UConnect
system.
When calling a number with your UConnect system
that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can press
the VOICE RECOGNITION button and say the sequence
you wish to enter, followed by the word Send. For
example, if required to enter your PIN number followed
with a pound, (3 7 4 6 #), you can press the VOICE
RECOGNITION button and say, 3 7 4 6 # Send. Saying
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
a number, or sequence of numbers, followed by Send, is
also to be used for navigating through an automated
customer service center menu structure, and to leave a
number on a pager.
You can also send stored UConnect phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the VOICE RECOGNITION button
and say, "Send." The system will prompt you to enter the
name or number and say the name of the phonebook
entry you wish to send. The UConnect system will then
send the corresponding phone number associated with
the phonebook entry, as tones over the phone.
NOTE:
• You may not hear all of the tones due to cellular phone
network configurations; this is normal.
3