Dodge Caliber Owner's Manual page 137

To turn ESP on again, momentarily depress the
"ESP OFF" button.
WARNING!
In the Partial ESP mode, the engine torque reduction
and stability features are desensitized. Therefore, the
enhanced vehicle stability offered by ESP is
unavailable.
NOTE: To improve the vehicle's traction when driving
with snow chains, or starting off in deep snow, sand or
gravel, it may be desirable to switch to the "Partial ESP"
mode by pressing the "ESP OFF" button. Once the
situation requiring ESP to be switched to the "Partial
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
ESP" mode is overcome, turn ESP back on by momen-
tarily depressing the "ESP OFF" button. This may be
done while the vehicle is in motion.
ESP/BAS Warning Light and ESP/TCS Indicator
Light
The malfunction indicator for the ESP is combined with
the BAS indicator. The yellow "ESP/BAS Warning
Lamp" and the yellow "ESP/TCS Indicator Light" in the
instrument cluster both come on when the ignition
switch is turned to the "ON" position. They should both
go out with the engine running. If the "ESP/BAS Warn-
ing Lamp" comes on continuously with the engine
running, a malfunction has been detected in either the
ESP or BAS system, or both. If this light remains on after
several ignition cycles, and the vehicle has been driven
several miles at speeds greater than 30 mph (48 km/h),
see your authorized dealer as soon as possible to have the
problem diagnosed and corrected.
3