Power Switch Location - HP Model 735 - Workstation Manual

System Unit Controls
Before powering on the system, you should become familiar with the system unit
controls.
This chapter introduces the HP Apollo 9000 Series 700 Model 735 workstations.
Its purpose is to familiarize you with the workstation and its controls and indica-
tors. Included in this chapter are the following topics:
Product description
System unit controls
Understanding the LEDs
System unit rear panel connectors
c Monitor controls, connectors, and indicators
Figure 1– 1 shows the power switch and the Power LED.
Front
\
\
I
Power
LED
~ower.vvitch
Figure 1 – 1. Power SwitchLocation
Figure 1– 2 shows the location of the TOC (Transfer Of Control) and Service/Nor-
mal Mode switches. These switches are located behind a hinged cover on the front
of the system unit.
Product Information
1–3