Registering The Server; Routine Maintenance - HP ML570 - ProLiant - G2 Setup And Installation Manual

Installing the Tower Server
7. Follow the instructions provided by the SmartStart software or the operating
system manufacturer.
For more information about using RBSU or the SmartStart software to install an
operating system, refer to Chapter 8, "Server Configuration and Utilities."
After RBSU configures your hardware for the first time, use the SmartStart software
to install the operating system of your choice.
For the most current information about operating system support on the servers, refer
to the operating system support matrix available at the FTP site:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf

Registering the Server

You can register the server with the forms provided with the server or from the
website:
www.hp.com/servers/proliant/manage

Routine Maintenance

The HP ProLiant ML570 Generation 2 Maintenance and Service Guide provides
specific information required for general maintenance and component replacement,
including:
•
Spare part numbers
•
Removal and replacement procedures
•
Diagnostic tools
The HP ProLiant ML570 Generation 2 Maintenance and Service Guide can be
accessed through the Documentation CD or the website:
www.hp.com/servers/proliant/manage
6-8 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide