Panasonic Viera TH-L47E5Z Operating Instructions Manual page 17

4 [WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the TV with the access point
WPS(Push button)
1) Please press the 'WPS' button on the wireless
access point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the wireless access point.
d
n
3. After the access point setting is finished, perform the connection test
4. Go to the next step
Select [Home]
5
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
■
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
●
You can return to viewing environment selection screen at the stage of Shop confirmation screen.
1
Return to viewing environment
n
selection screen
Shop
To change viewing environment later on, you will need to initialise all settings by accessing Shipping
Condition.
Auto Tuning is now complete and your TV is ready for viewing
If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.
Note
e
●
To check the channel list
●
To edit or hide (skip) channels
●
To retune all channels
●
t To add the available TV mode later
●
To initialise all settings
.
th-l32_42_47e5z.indb 17 th-l32_42_47e5z.indb 17
Connect
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
(Press twice)
Home Shop
You have selected shop mode
[Shipping Condition] (p. 41)
"Using the Freeview Guide (Digital TV)" (p. 23)
"Tuning and Editing Channels" (p. 36 - 39)
[Auto Tuning] in "Tuning and Editing Channels" (p. 38, 39)
[Add TV Signal] (p. 34)
[Shipping Condition] (p. 41)
●
Ensure that your access point supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
If the connection has failed, check the settings and positions of
your access point. And then, follow the on-screen instructions.
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
select
set
2
Select [Home]
Please select your viewing environment.
Home
select
Shop
set
3/20/2012 11:48:23 AM 3/20/2012 11:48:23 AM
17