Panasonic Viera TH-L47E5Z Operating Instructions Manual page 11

Indicator / Control panel
1 Function select
● [Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]  /
[Treble]  / [Balance] / [Digital TV Auto Tuning] /
[Analogue TV Auto Tuning]
 [Music] or [Speech] mode in the Sound Menu
y
2 Channel Up / Down, Value change (when using the
F button), Switching the TV on
3 Changes the input mode
4 Mains power On / Off switch
● Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
●
When pressing the control panel button (1 - 4), the
control panel guide appears on the right side of the
screen for 3 seconds to highlight the pressed button.
5 Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 30)
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
■
Operation guide
Operation guide will help you to operate by using
the remote control.
Example: [Sound Menu]
Main Menu
of
Picture
Sound
Network
Timer
e).
Setup
Select Select
EXIT EXIT
Change Change
RETURN RETURN
Operation guide
t,
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
No signal is received and no operation is performed for 30 minutes in Analogue TV.
•
[Off Timer] is active in the Timer Menu. (p. 21)
•
No operation is performed for the period selected in [Auto Standby] (p. 33).
•
●
This function does not affect One Touch Recording.
th-l32_42_47e5z.indb 11 th-l32_42_47e5z.indb 11
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Auto Gain Control Off
Volume Correction
Speaker Distance to Wall Over 30cm
Selects your favourite sound Selects your favourite sound
mode. mode.
Page down Page down
5
7 Power and Timer LED
Red: Standby
Green: On
Orange (flash):
•
Red with orange flash:
•
●
The LED blinks when the TV receives a command
from the remote control.
- Operation guide
■
How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
1/2
levels (left and right only)
0
Access the menu / store settings after adjustments
0
0
have been made or options have been set
11
Return to the previous menu
0
Exit the menu system and return to the normal
viewing screen
Page up Page up
6 7
Rear side of the TV
One Touch Recording in progress
Standby with One Touch Recording
1
2
3
4
11
3/20/2012 11:48:18 AM 3/20/2012 11:48:18 AM