Assembly Instructions and Parts List
Please read and save these instructions. Read carefully before attempting to assem-
ble, install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
Specifications
Cleaning
Model
Power
PW1686
2640
Assembly Instructions
1. Attach detergent suction tube to
hose barb on detergent tank and
put cap on detergent tank (Figure
1).
2. Slide accessory storage bracket onto
back of pressure washer (Figure 1).
3. Slide cord holder and lance storage
collar onto side of pressure washer
(Figure 1).
4. Align handle on back of pressure
washer and attach using screws pro-
vided (Figure 1).
5. Assemble one wheel to axle and
slide through back of pressure wash-
er and detergent tank (Figure 2).
© 2003 Campbell Hausfeld
Max Pressure
with
Standard
Maximum (Single
Lance
Capacity
1650 psi
1.6 GPM 14 Amps
For parts, product & service information
visit www.chpower.com
Electric Pressure
Washer
NOTE: REFER TO PRODUCT MANUAL
FOR ALL SAFETY INSTRUCTIONS
Motor
Power
Phase)
Voltage
120V
3
3
Figure 1
Figure 2
PW1686
Maximum
Inlet
Water
Unit
Temp.
Weight
100˚F
38 lbs.
4
1
2
IN463600AV 12/03