AEG LAVAMAT 88810 User Information page 22

Setting the Memory
Example: Programme posi-
tion MEMORY 1 is to be giv-
en the following programme
combination: LINEN/EASY
CARES 40 °C, 800 rpm, with
PREWASH.
1. Turn the programme knob to
LINEN/EASY CARES.
2. Press the TEMP. key repeatedly, until 40 °C appears in the display.
3. Press the RPM key repeatedly, until 800 appears in the display.
4. Using the OPTIONS key
bar appears under the PREWASH symbol
5. Press the OPTIONS key repeatedly, until the SETUP symbol
6. Press the OK key. The display
changes to the Special Func-
tions level. Programme
memory position MEMORY 1
is offered first.
3
To change to another memo-
ry position, press the OP-
TIONS key.
7. Press the OK key.
The programme combination is now stored to programme knob posi-
tion MEMORY 1 and in the future can be selected directly using the
programme knob.
3
The Memory can be overwritten at any time with a new programme
combination (see "Changing the Memory"), but cannot be deleted.
Changing the Memory
1. Put together the new programme combination as required (for an ex-
ample, see "Setting the Memory", steps 1 to 4).
2. Press the OPTIONS key repeatedly, until the SETUP symbol
3. Press the OK key.
4. Using the OPTIONS key select the memory position to be changed, e. g.
MEMORY 1.
5. Store the new programme combination using the OK key.
22
LINEN/EASY CARE
Cycle end at
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
TEMP. RPM
set PREWASH and press the OK key. A black
.
Memory 1
Store program
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM
12.45
14.37
OPTIONS OK
flashes.
OPTIONS OK
flashes.
TIME
TIME