Opening The Door/Loading The Washing; Current Load Display - AEG LAVAMAT 88810 User Information

Opening the door/Loading the washing

1. To open the door: pull the handle on the door.
2. Unfold washing and load it loosely
into the machine. Mix large and
small items.
Attention! Do not get any washing
caught between the door and the
rubber seal.
3. Push the door firmly shut. Door
catch must audibly click shut.

Current load display

3
If settings are not undertak-
en for several seconds dur-
ing the programme setting
process or when loading
with laundry, the following
indicators appear on the
display when the machine
door is open:
– the maximum permissible load for the selected programme,
– and the actual loading in 0.5 kg steps. This is also displayed by the lit-
tle filled boxes (loads of less than 0.5kg are not displayed).
If too much laundry has been loaded into the machine, the indicator
OVERLOAD appears in the display. Please remove the relevant amount
of laundry in such cases.
It is possible to carry out more programme settings.
3
If the laundry is removed again before the programme starts, the cur-
rent load display may not change back to 0. If this occurs, please turn
the machine off and switch it back on again after approx. 3 seconds.
Reset the programme and refill machine with laundry.
The current load display goes out if the door is closed.
Max. load:
¢¢££££££££
50C 800
TEMP. RPM OPTIONS
6.00
kg
kg
1.5
ýaýaýaýaýa
OK TIME
15